Faq

  • J: How to Install and Use Art Ethanol Fires

    A:

    For all of you who failed to enjoy the pleasure of a fireplace because of a modest environment like a condo or an apartment, or simply because it is not allowed, there now is an alternative. Art Bioethanol fireplaces offer a unique and ecological way for you to enjoy the warmth and comfort you are looking for.
    How to Install and Use the automatic interlligent bio ethanol fires?

    The Structure and Design of Art Ethanol Burner:

    1.All our products come with 1 handset and 1 power adaptor amd Spare parts.

    2.Install the burner steadly.

    3.Connect Power Supply to the Burner.

    All our products come with power adaptor with plug

    An adapter is provided with your fireplace:INPUT 100-240 volt 50/60 Hz and OUTPUT 12V/7A or 12V 10A.

    Before positioning,the device must be connected with the supplied adapter to the power supply.

    4.Open the tank door,add moderate alcohol to stainless steel burner.

    Notice:You absolutely need to close the tank trap door if you want to ignite your ethanol fireplace.For sercurity reasons a system will check and lock the trap door before ignition.If the tank door is not closed,the LED screen will show”Door″.So after filling the ethanol tank,you need closed the tank door before using the thanol fireplace devices.

    5.Press the switch ON/OFF DURING 5 SECONDS or press on the remote control.after a few seconds an automatic ignition will take place.

    Operation of Igniting the bio ethanol fireplaces:

    1.Press the right button under the LED during FIVE SECONDS.
    2.The LED will show the operating time.
    3.the Pump will operate to pump the bioethanol into the trough of the fireplace.
    4.Then the igniter will work to ignite the ethanol.
    5.the temperature get above 78℃,it will ignite the ethanol.
    For the first the fireplace is used,we suggest to fill up the tank until it is full.
    Because when the burner is new,there is air inside the pump and the pipe,
    so it is a little bit difficult for the pump to pump the ethanol to the fireplace Trough.
    If the tank is full ,the pressure of the liquid could push the air out from the pump and the pipe,
    then the pump can work normal.
    So Our suggestion is to fill up the tank until it is full,and try to start the burner again.

     

    If the problem still exists, you need to open the fireplace, the step is as below:

    1.Clean all the ethanol out from the tank, make sure the tank is empty.
    2.Lossen the screws which are used to fis the top plate and the black box.
    3.Take the top plate out from the black box.But when you try to take the top plate out from the black box ,please
    pay attention,because there is two wires connceted between the top plate and the black box,you need to disconnect these two wires.
    4.The pump system is on the one side of the fireplace.The main problem is the air inside the pump,so Please try to push some liquid inside the pipe which is connected between the pump and the tank,then the pump could work normal.

    About Restart of Art fireplace with safety function:

    After shutting the fireplace,the Alcohol Tray is hot.If you want to restart,you need to wait arround 5 minutes until the temperature of the tray is bellow 60℃If you start it immediately after shut off the fireplace,the “TEMP” will show on the LED screen.

  • J: How to Install An Art Vapor Fire Device

    A:

    To make the vapor fireplace insert, you could simply use commercial ones already available on the market. Art Vapor Fire Team Focus on Intelligent Fires For more than 10 years.The quality and Technology are reliable with great value.
    1.Prepare the housing with cutout exactly to the specifications provided.10mm wider than the drawings for the housing.
    To install an Art vapor fireplace, you need to create a housing (a surface that will support the fireplace insert).

    2.Leave holes or gaps for air intake bellow the fireplaces.
    People may use vapor fires in many different places with different decorations,for traditional fireplace designs with/without logs or for modern designs with/without glasses arround,
    For different designs,we should make sure if there is enough air intake bellow the fireplace to let the vapor go upwards.
    3.Plug in the system and insert it into the housing.
    A standarded Volt electrical outlet is required. (best located inside the housing). The system comes with a 100/240V (50-60 Hz) – 24V UL Listed power adapter (converter).
    Unlike other vapor fire systems,An Art Fire vapor fire works with a low voltage system,so it is much safer.

    If people want to connect the water pipe to the fireplace,people can prepare a water plastic tube from the water pipe system in the housing and connect it to the fireplace.
    Turn on the faucet,water will comes into the fireplace automatically.When it comes to a spirit level,it will stop injection.So people no need to add water into the fireplace manually any more.

    As you can see, it is not that hard to build your own water vapor fireplace. Sure, you will spend more time to install everything.
    So, is it really worth it in the end? Well, that all depends on your crafting skills and your budget.

    General conclusions
    Water vapor artificial fireplaces are cool gadgets that will certainly entertain your guests! You can now also impress them by explaining the science behind these fake fireplaces! I hope that you enjoyed this review. If you want to know more functions and guidelines about Art water vapor fires,please contact us freely.

    Email us at : [email protected] We will reply you within 12hours.

  • J: How to Purchase Art Fire Devices

    A:

    Art Fireplace izplata savus produktus vairāk nekā 100 valstīs un piegādā uz jebkuru vietu pasaulē. To find out where to purchase an Art Fireplace fireplace or insert, lūdzu, aizpildiet veidlapu, kuru varat atrast kontaktu lapā. Art Fireplace aģents jums atbildēs pa e-pastu 12 stundas kopā ar katalogu un cenām.
    Ja jūsu pieprasījums ir precīzāks un ietver vienu vai vairākus konkrētus modeļus, nevilcinieties tos pieminēt saziņas veidlapā. Pēc tam mēs jums nosūtīsim konkrētu šī produkta tehnisko aprakstu, uzstādīšanas shēma ar mērījumiem, kas jāievēro, kā arī tāme ar piegādes izmaksām.

    Is sample order available?
    For New distributors,we are pleased to offer a sample unit for first cooperation.

    Kā pasūtīt un apmaksāt?
    Pēc tāmes saņemšanas un, ja vēlaties veikt pasūtījumu, lūdzu atsūtiet mums:
    Jūsu piegādes adrese, ieskaitot pasta indeksu (kā arī norēķinu adrese, ja tā atšķiras).
    Piegādātāja tālruņa numurs.
    Jūsu maksājuma kopija
    Pilna samaksa pēc pasūtījuma:
    Ar bankas pārskaitījumu, bez maksas
    Izmantojot tāmē norādīto bankas informāciju, lūdzu, nosūtiet mums kopiju, lai mēs nekavējoties varētu nosūtīt jūsu paku.
    Ar PAYPAL, izmantojot jūsu kredītkarti(+4%)
    Ja izvēlaties šo risinājumu, lūdzu, pieprasiet mums PayPal rēķinu.
    Šis rēķins jums tiks nosūtīts laikā 24 stundas pa e-pastu.
    Izpildiet pievienoto saiti, lai maksātu tieši drošajā PayPal platformā.
    Tiklīdz jūsu maksājums ir veikts, mēs tiksim informēti tieši un izsūtīsim jūsu pasūtījumu.
    PayPal uzņēmums garantēs jūsu pasūtījuma piegādi

    How long does delivery take?
    Art Fireplace is a manufacturer, so it manages production and has a wide inventory.
    Produktus nosūta lieli specializēti uzņēmumi, piemēram, DHL, TNT, UPS, utt.
    Vispārīgi, ieliktņi un kamīni tiek piegādāti desmit darba dienu laikā.
    For big order,we recommand shipping by sea.

  • J: Function Features of Art Electronic Ethanol Fire Models

    A:

    With an Art electronic ethanol fireplace, lighting is done automatically, by simply pressing a button ON/OFF. There is no need to bring your hands near the flame. Also, this means you’re only lighting a few centiliters of the combustible injected by the pump and not the entire quantity of ethanol like in a manual reservoir burner.

    Art Ethanol Fire Models Featured Functions:
    1.Intelligent ethanol burner extinction or ignition ordered by electric board and a Button ON/OFF and remote control.
    2.Automātiska degļa iepildīšana un manuāla degļa iepildīšanas funkcija.
    3. Materiāls no nerūsējoša materiāla un MDF.
    4. Atsevišķi bioetanola tvertne un kurtuve.
    5. Co2 drošības infrasarkanais detektors, kas aptur uguni, ja tiek sasniegts neatļauts līmenis.
    6.Atslēdziet funkciju, ja degli pārvieto ārējs spēks.
    7. Automatic electric pump to fill the combustion tray of the burner.
    8. Ar elektroniskiem siltuma detektoriem, tas automātiski izdzisīs, kad temperatūra sasniegs neatļautos līmeņus.
    9. Maiņstrāvas lādētājs vai akumulatora lādētājs ar akumulatora iekrāvēju.
    10, Ar audio efektu.
    11. Bērnu bloķēšanas funkcija.

    Iedvesmas ekoloģiskais ugunsgrēks: kultūru un atmosfēras sajaukums! Šī būs lieliska ideja super interjera uguns telpas dizainam!
    Mēs varam iedomāties visus rotājumus ar šīm jaunajām ugunsdzēsības ierīcēm. Patiešām jauka ideja par mūsdienīgu inteliģentu bioetanola kamīnu!
    Ieviesiet mājā šī skaistā kamīna intīmo atmosfēru un izbaudiet tīro mājīgumu.
    Ar mākslas etanola liesmām Kamīns, Sēžam kopā, Daloties laimē un panākumos ar savu ģimeni un partneriem, dzerot sarkanvīnus, Runā, Spēlē, Smejas ... Tam jābūt lieliski!!!

Nosūtiet mums savu ziņu:

JAUTĀJUMS TAGAD
JAUTĀJUMS TAGAD